Universal/Universal FX Pin-Outs, Ports F-H
The user can take advantage of debug modes to halt normal processor execution and use a computer to control the processor.
The user can then directly control the target's execution, read/write registers and memory values, debug code on the processor,
and program internal or external FLASH memory devices.
FX Note: The USB Multilink Universal FX is capable of providing power (5V or 3.3V) directly to the target processor via
the TVCC pin. This removes the need for an external power supply for systems requiring 200mA of current or less.
2
Usage
The USB Multilink Universal and Universal FX can communicate with Kinetis (including L-Series devices), Qorivva MPC5xxx,
ColdFire V1/V2/V3/V4, Power Architecture PX Series, RS08, HCS08, HC(S)12(X), S12Z, DSC, and HC16/683xx (FX only)
microprocessors by connecting a ribbon cable between the target's debug header and one of the multiple ports on the Multilink.
Do not attempt to use multiple ports at once, as this may damage both the target processors as well as the Multilink.
The USB Multilink Universal and Universal FX interfaces will work with targets whose processor power supply is in the range of
1.8V to 5V.
On the Universal FX, if the user wishes to provide power to the target, the JP10 Jumper (FX only) is used to enable this option
and select the voltage. A shunt at position 1-2 enables 5V, while a shunt at position 2-3 enables 3.3V. The USB Multilink
Universal and Universal FX have a female type B USB connector. Use a Type A to Type B male-to-male USB cable to connect
the interface to the PC.
Universal/Universal FX Header Layout (Pin 1 Highlighted)
There are two LEDs on the Multilink interface. The blue LED indicates that the interface is powered and running. The yellow
LED indicates that target power has been detected.
Note:
Note:
If connecting to a ColdFire V2-4 processor which requires synchronous communication, such as the
MCF5272 and MCF5206(E), a CABLE-CF-ADAPTER (sold separately) is required.
To avoid improper connections, the red stripe of the ribbon cable should always be oriented towards Pin 1,
both on the Multilink port and the target processor header.
The USB Multilink Universal and Universal FX are USB devices. If a USB Hub is used, it must be a self-powered hub (i.e. with
its own power supply). By default, the USB protocol used is USB 2.0.
USB Multilink Universal & USB Multilink Universal FX - Technical Summary
相关PDF资料
U-MULTILINK PROGRAMMER MULTILINK HCS08 COLDF
U2D-MIPS USB2DEMON BDM/JTAG MIPS
UBA2032TS/N2,118 IC DRIVER FULL BRIDGE 28-SSOP
UBA2033TS/N2,118 IC FULL BRIDGE DRIVER 28-SSOP
UBA3070T/N1,118 IC LED DVR WHITE BCKLGT 8-SOIC
UEVM4430G-01-00-00 PANDABOARD
UEVM4460G-02-01-00 PANDABOARD ES
UHDM7218BPA PLATE BARRIER 71.86X17.87" GRY
相关代理商/技术参数
UMV0G101MFD 功能描述:铝质电解电容器 - 带引线 4volts 100uF 6.3x5 20% 2.5LS RoHS:否 制造商:Kemet 引线类型: 电容:220 uF 容差:20 % 电压额定值:25 V 工作温度范围: 端接类型:Radial 外壳直径:8 mm 外壳长度:11 mm 引线间隔:5 mm 产品:General Purpose Electrolytic Capacitors 封装:Bulk
UMV0G101MFD1TP 制造商:Nichicon Corporation 功能描述:CAP ALUM 100UF 4V 20% RADIAL
UMV0G220MFD 功能描述:铝质电解电容器 - 带引线 4volts 22uF 4x5 20% 1.5LS RoHS:否 制造商:Kemet 引线类型: 电容:220 uF 容差:20 % 电压额定值:25 V 工作温度范围: 端接类型:Radial 外壳直径:8 mm 外壳长度:11 mm 引线间隔:5 mm 产品:General Purpose Electrolytic Capacitors 封装:Bulk
UMV0G220MFD1TP 功能描述:22μF 4V Aluminum Capacitors Radial, Can 5000 Hrs @ 105°C 制造商:nichicon 系列:UMV 包装:剪切带(CT) 零件状态:有效 电容:22μF 容差:±20% 额定电压:4V ESR(等效串联电阻):- 不同温度时的使用寿命:105°C 时为 5000 小时 工作温度:-40°C ~ 105°C 极化:- 应用:通用 纹波电流:22mA 阻抗:- 引线间距:0.059"(1.50mm) 大小/尺寸:0.157" 直径(4.00mm) 高度 - 安装(最大值):0.236"(6.00mm) 表面贴装焊盘尺寸:- 安装类型:通孔 封装/外壳:径向,Can 标准包装:1
UMV0G330MFD 功能描述:铝质电解电容器 - 带引线 4volts 33uF 5x5 20% 2LS RoHS:否 制造商:Kemet 引线类型: 电容:220 uF 容差:20 % 电压额定值:25 V 工作温度范围: 端接类型:Radial 外壳直径:8 mm 外壳长度:11 mm 引线间隔:5 mm 产品:General Purpose Electrolytic Capacitors 封装:Bulk
UMV0G330MFD1TP 功能描述:33μF 4V Aluminum Capacitors Radial, Can 5000 Hrs @ 105°C 制造商:nichicon 系列:UMV 包装:剪切带(CT) 零件状态:有效 电容:33μF 容差:±20% 额定电压:4V ESR(等效串联电阻):- 不同温度时的使用寿命:105°C 时为 5000 小时 工作温度:-40°C ~ 105°C 极化:- 应用:通用 纹波电流:30mA 阻抗:- 引线间距:0.079"(2.00mm) 大小/尺寸:0.197" 直径(5.00mm) 高度 - 安装(最大值):0.236"(6.00mm) 表面贴装焊盘尺寸:- 安装类型:通孔 封装/外壳:径向,Can 标准包装:1
UMV0G470MFD 功能描述:铝质电解电容器 - 带引线 4volts 47uF 5x5 20% 2LS RoHS:否 制造商:Kemet 引线类型: 电容:220 uF 容差:20 % 电压额定值:25 V 工作温度范围: 端接类型:Radial 外壳直径:8 mm 外壳长度:11 mm 引线间隔:5 mm 产品:General Purpose Electrolytic Capacitors 封装:Bulk
UMV0G470MFD1TP 制造商:Nichicon Corporation 功能描述:CAP ALUM 47UF 4V 20% RADIAL